> For the complete documentation index, see [llms.txt](https://agamrobotics.gitbook.io/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://agamrobotics.gitbook.io/docs/digital-power-modules-dpm/dpm01-pro-12s.md).

# DPM01 Pro 12S

This is the Pro version of Digital Power Module for Agam Autopilot v6X-RT. 

DPM01 Pro is designed for high current capacity as compared to the low profile design DPM01 DPM01 Pro comes with either XT90 or AS150 pre-soldered on both sides based on customization.

If you need custom soultions on this, please contact <info@agamrobotics.com>

The power module is connected using the I2C protocol. It is designed for flight controllers based on the Pixhawk FMUv6X open standard like Agam Autopilot v6X-RT.

### Tech Spec:

Max input voltage: 50V

Rated current: 200A

Max current: 300A (<60S)

Outputs: 5V and 3A max

I2C interface for Voltage and current monitor

Supports from 2S up to 12S/14S battery

Weight: 70g