# DPM01-6S

This is the standard Digital Power Module for Agam Autopilot v6X-RT. 

DPM01 is a low profile design that comes with XT60 pre-soldered on both sides.

The power module is connected using the I2C protocol. It is designed for flight controllers based on the Pixhawk FMUv6X open standard like Agam Autopilot v6X-RT

### Tech Spec:

Max input voltage: 36V

Rated current: 60A

Max current: 120A (<60S)

Outputs: 5V and 3A max

I2C interface for Voltage and current monitor

Supports from 2S to 6S battery

Weight: 30g


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://agamrobotics.gitbook.io/docs/digital-power-modules-dpm/dpm01-6s.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.