AgamRobotics Docs
  • Welcome
  • Autopilots/Flight Controller
    • Agam Autopilot v6X-RT
      • Introduction
      • Technical Specification
      • Firmware
      • Pixhawk Autopilot Standard
      • Supported Hardware
      • Placement and Orientation
      • Baseboard Port
      • Agam Autopilot v6X-RT Wiring
      • In-Field Compass calibration
      • Companion computer setup
  • Power Modules
    • DPM01
    • PX4 Setup
Powered by GitBook
On this page
  1. Autopilots/Flight Controller
  2. Agam Autopilot v6X-RT

Placement and Orientation

PreviousSupported HardwareNextBaseboard Port

Last updated 6 months ago

The Agam Robotics logo itself acts as the direction arrow and it points forward as shown below.